Description
Inspired by the look of natural, unearthed stone, the Diamond Pro® PS Quarried Face pairs the time-tested strength of a Diamond Pro® retaining wall system with the installation ease of a pin locator
Inspired by the look of natural, unearthed stone, the Diamond Pro® PS Quarried Face pairs the time-tested strength of a Diamond Pro® retaining wall system with the installation ease of a pin locator.
- Pin system installation method
- Large cores for ease in handling
- Ease of installation with oversized pin aligning cores
- Pin cores allow for multiple batter options
- Build walls in excess of 50 feet when combined with geosynthetic reinforcement
- One square foot of wall face per block
- Gravity walls can be built up to 4 feet high, including the buried course, with 7.1 degree batter
- Minimum outside radius, measured on the top course to the front of the units: 4 feet
- Minimum inside radius, measured on the base course to the front of the units: 6 feet
- Setback/System Batter: Near Vertical and 1?/7.10; additional system batter can be created by alternating pin placement on each course of wall
